This means limited capability and greatly reduced power. Having an automotive battery like this may leave you stranded in the middle of nowhere or limited mobility.
However, there are plenty of things that you can do to fight this condition. Giving you the ability to keep your car battery in shape and help it retain its maximum capability to store charge and provide the optimum performance that you need.
In this article, we are going to provide you the information that you need to understand the behavior of your car battery. We will also provide you with some tips on how can you extend your battery life as well as a guide on how to clean battery terminals with coke and other materials.
With this article, you will be able to take care of your car battery and keep it in shape. Allowing you to get the most out of it and then help you to unleash your battery’s maximum potential and capabilities and use them to your advantage.
- 1 Defining and Understanding Corrosion
- 2 Several Tips to Extend Your Battery Life and Keep it in Shape
- 3 Cleaning Corroded Battery Terminals with Coke or Soda
- 3.1 Step 1 – Gathering All the Materials that You Need
- 3.2 Step 2 – Make Sure to Wear the Protective Gears
- 3.3 Step 3 – Preparing the Car Battery to be Cleaned
- 3.4 Step 4 – Physically Inspect the Battery to be Cleaned
- 3.5 Step 5 – Cleaning the Battery Terminals with Coke
- 3.6 Step 6 – Rinsing the Terminals and Wiping Them Dry
- 4 Final Thoughts
Defining and Understanding Corrosion
Corrosion by definition is a process that happens overtime where refined metals are converted to a more chemically stable form. It is the progressive destruction of materials through chemical reactions, and it is one of those processes that can be the primary factors that lead batteries to their deaths.
Once a battery undergoes this process, its plates and terminals will slowly lose the capability of storing and conducting charge. The process will gradually weaken the battery’s ability to store charge and eventually render it to be useless and dead.
Several Tips to Extend Your Battery Life and Keep it in Shape
To help you keep your car battery in check and help you keep it well-maintained. Here are some of the tips from auto mechanics and car experts.
Following these tips will not only help you maintain your battery extend its life, but it will also help you unleash its maximum potential and allow it to provide the optimum performance that you need every day.
Tip # 1 – Regular Upkeep
One of the best ways to keep your automotive battery in check is to give it the attention it needs, and it requires. Giving it a regular maintenance check like a monthly checkup will help you understand what is going on with your car battery. It will also help you be updated with regards to physical damages and other issues that your battery may have.
Tip # 2 – Reconditioning As Preventive Maintenance
Reconditioning your car battery at least twice a year is also a great way of keeping your battery in top shape. It will help you prevent sulfation and corrosion from having its way on your automotive battery, and it will also make sure that you will not suffer in any car battery issue. Reconditioning your battery will also keep your battery clean and help it retain its maximum capability to store charge.
Tip # 3 – Keep Your Battery at All Times
Another way to keep your car battery in good condition is by always keeping it clean. Regularly cleaning the battery terminals and freeing them from corrosion will allow them to perform better and provide the optimum performance that you and your car need for the day to day operations. There are plenty of way of to do this and below is a guide that will teach how to clean your corroded battery terminals with coke.
Cleaning Corroded Battery Terminals with Coke or Soda
Having a car battery with corroded terminals can spell a lot of troubles especially for everyday drivers and individuals relying on their vehicles on their day to day routines.
However, there are several easy ways on how to avoid this problem. Cleaning your battery terminals is the best way of doing this, and there are plenty of different ways on how to do it.
Below is a guide that will help you clean your battery terminals by using a can of soda or coke. A very helpful and effective guide that will only cost you a few bucks!
Step 1 – Gathering All the Materials that You Need
Before the cleaning process, the first thing you have to do is to gather everything that you need for the entire process.
The materials that you need are listed below:
● Set of screwdrivers
● An old toothbrush or wire brush
● A piece of cloth
● A can of soda (coke)
● Leather gloves
● Protective goggles
Step 2 – Make Sure to Wear the Protective Gears
Before you proceed with the main cleaning process, you first have to make sure that you are wearing the proper protective gears. So in this, you will have to wear the goggles and the gloves to make sure you are protected from the battery acids that may be leaking.
Step 3 – Preparing the Car Battery to be Cleaned
Once you got all the materials that you need for the entire process, you can now prepare the battery that will clean. Disconnect every wire connected to the battery then unscrew all the screws that firmly attach it to the battery tray. Then remove the battery from the hood then set it aside to prepare for the next step.
Step 4 – Physically Inspect the Battery to be Cleaned
Then give the battery a quick physical inspection to see if there are any physical damages to the housing of the battery. Check if any leakages around the battery can be very harmful to you and your surroundings.
Step 5 – Cleaning the Battery Terminals with Coke
For the main cleaning operation, take your can of soda or coke and then pour some on the battery terminals. Then use the old toothbrush or wire brush to scrub all the corrosion that may be on the battery terminals.
Step 6 – Rinsing the Terminals and Wiping Them Dry
After thoroughly cleaning the terminals with soda and scrubbing them with the old toothbrush or wire brush you can rinse them with water. Use the piece of cloth to wipe them dry and get the battery ready for reinstalling in the tray and reconnecting with the car.
That is how to clean battery terminals with coke. It’s a pretty effective way of keeping your automotive battery terminals away from corrosion. As an additional step, you can apply some petroleum jelly on the terminals to protect them from future corrosion.